MACHINESAVER / Machine 01 (GW-01) · sensor attached · replace sensor · analysis runs
low
(score 1.04, higher is worse),
calculated 2026-10-06 02:34:18+0000 by analysis
ca68588f85199935f6116c536fe118b6.
| Level | Score | Calculated | Analysis |
|---|---|---|---|
| low | 1.04 | 2026-10-06 02:34:18+0000 | ca68588f85199935f6116c536fe118b6 |
| low | 1.04 | 2026-09-16 08:15:43+0000 | 6812b577a3d70fbe5ab53c90e412da5d |
78 measurements; latest 2026-09-07 23:35.
| KPI | Latest value | Points in trend |
|---|---|---|
| rms | 0.053280288300546846 | 78 |
| velocity_rms_10_1000hz | 0.21287183230683313 | 78 |
| velocity_rms_2_1000hz | 0.3188870993140975 | 78 |
| velocity_rms_2_max | 0.3220219184960264 | 78 |
| velocity_rms_10_max | 0.21753976848514592 | 78 |
| peak | 0.25081396484375 | 78 |
| peak2peak | 0.496 | 78 |
| crest_factor | 4.707443837933883 | 78 |
| kurtosis | 4.6975965176039995 | 78 |
| envelope_rms | 0.007711878740381855 | 78 |
| envelope_peak_score | 0.0006102534260874412 | 78 |
| Symptom | Active | Detections | Possible faults |
|---|---|---|---|
| symptomHaystack | no | 5 active of 5 | lubricationIssue (60%), processRelatedLoading (40%) |
| Active change | Type | At |
|---|---|---|
| Emerging Mode | emergingMode | 2026-09-07 21:27 |
Scalars are keyed by sensor, not by stream — the link to this measuring point is derived: this point's streams name their active sources, the sources name their sensors, and the sensors' scalars are what you see here. The scalars page draws the whole chain.
| Slot | Scalar | Latest | Trend |
|---|---|---|---|
| axis X | acceleration_rms__X (rms) | 0.056 g | |
| axis Y | acceleration_rms__Y (rms) | 0.044 g | |
| axis Z | acceleration_rms__Z (rms) | 0.088 g | |
| axis X | velocity_rms__X (velocity_rms) | 0.356 inch_s | |
| axis Y | velocity_rms__Y (velocity_rms) | 0.254 inch_s | |
| axis Z | velocity_rms__Z (velocity_rms) | 0.635 inch_s |
| Sensor-level | Latest | Trend |
|---|---|---|
| RSSI (untyped) | -43 dBm | |
| battery (battery) | 100 % | |
| temperature (temperature) | 18 C |
rpm: outside 600–3600 RPM an rpm scalar is
required — without it, bearing analysis silently returns nothing.
This iframe is the one thing the browser loads straight from the deployment.
Its URL carries only the stream id — no credential — and this page's own
Content-Security-Policy: frame-src header is what allows the
frame (the deployment sets no framing restriction of its own).